CAL SPAS PUMP 1.0 HP 2SPD 115V/60HZ, 56F PUM22000135

Item #: CAL SPAS PUM22000135
PUMP 1.0 HP 2SPD 115V/60HZ, 56F
Weight: 1.00 lb


Used By:     

View other Pumps products

Our premium quality Spa Pumps are unsurpassed for reliability and long life. Because of our huge buying power, we charge less for a complete new hot tub pump (motor & wet end) than some others charge for just a replacement motor or rebuilt unit!

    We use top quality Waterway wet ends and new high performance motors-- the best money can buy.

Need help?  See the replacement spa pump information Pump Selection & Installation Guide

A: 15-1/2"
B: 7 1/4"
C: 3 1/2"

Orientation of Wet End

Pump wet ends can be oriented in 90º increments to meet your installation requirements. Loosen the pump's four through bolts from the back of the motor and pull them back enough to disengage. Then rotate the wet end to the desired position, realign and re-tighten the bolts.

  Pump plumbing sizes are nominal, and not actual outside diameter (OD) of the threaded intake or discharge. Use a tape measure and check your old pump thread size against this sizing table for most* spa pump brands:

Plumbing Size   Pump Thread O.D. (approx.)
1.5" 2-3/8"
2.0" 3"
2.5" 3-5/8"

Product notes: 220-240V, 6.5A high speed (3450 RPM), 2.5A low speed (1725 RPM). 130 GPM on high speed. Order new pump unions (link below) if needed. Waterway part number: 3420620-15. Replaces motor numbers RB824, BN34 and 5KCP39SN4462X.

IMPORTANT: *Some brands of hot tub spa pumps (such as Hayward, Jacuzzi, and Sta-Rite) use non-standard fittings with different dimensions.

  Great price and features aside, buying from The Spa Depot provides access to one thing you can't get anywhere else: our expert technical support. Installation questions or need assistance? We're here to help!

  Toll Free (800) CAL-SPAS Support hours: Weekdays, 8 am - 5 pm, Pacific Time

Gate Valve
1 1/2" X 1 1/2"SPG
Price: $10.94

Price: $3.00

Price: $3.00

Pump Union
90 DEG 2" S X S
Price: $3.00

Skip Navigation Links